3-Leg
Copy needed.
Product Description
| EIPS Capacities in Tons Horizontal Angle | Skookum Master link Made in USA | |||||
|---|---|---|---|---|---|---|
| Rope Diameter (inches) | 60 Degree | 45 Degree | 30 Degree | Diameter | Inside Width | Inside Length |
| 1/4 | 1.7 | 1.4 | 0.97 | 1/2″ | 2.5″ | 5″ |
| 5/16 | 2.6 | 2.1 | 1.5 | 5/8″ | 3″ | 6″ |
| 3/8 | 3.7 | 3 | 2.2 | 3/4″ | 2.75″ | 5.5″ |
| 7/16 | 5 | 4.1 | 2.9 | 3/4″ | 2.75″ | 5.5″ |
| 1/2 | 6.6 | 5.4 | 3.8 | 1″ | 3.5″ | 7″ |
| 9/16 | 8.3 | 6.8 | 4.8 | 1″ | 3.5″ | 7″ |
| 5/8 | 10 | 8.3 | 5.9 | 1″ | 3.5″ | 7″ |
| 3/4 | 15 | 12 | 8.4 | 1-1/4″ | 4.38″ | 8.75″ |
| 7/8 | 20 | 16 | 11 | 1-1/2″ | 5.25″ | 10.5″ |
| 1 | 26 | 21 | 15 | 1-1/2″ | 5.25″ | 10.5″ |
| 1 1/8 | 31 | 26 | 18 | 1-3/4″ | 6″ | 12 |
| 1 1/4 | 38 | 31 | 22 | 2″ | 7″ | 14″ |
| 1 3/8 | 46 | 38 | 27 | 2″ | 7″ | 14″ |
| 1 1/2 | 55 | 45 | 32 | 2-1/4″ | 8″ | 16″ |
| 1 5/8 | 63 | 52 | 37 | 2-1/2″ | 8″ | 16″ |
| 1 3/4 | 74 | 60 | 42 | 2-1/2″ | 8″ | 16″ |
| 1 7/8 | 84 | 68 | 48 | 2-3/4″ | 9.5″ | 16″ |
| 2 | 95 | 78 | 55 | 2-3/4″ | 9.5″ | 16″ |
| 2 1/8 | 103 | 84 | 60 | |||
| 2 1/4 | 116 | 94 | 67 | |||
| 2 3/8 | 128 | 105 | 74 | |||
| 2 1/2 | 141 | 115 | 82 | |||
| 2 5/8 | 155 | 126 | 89 | |||
| 2 3/4 | 169 | 138 | 97 | |||
| 2 7/8 | 183 | 150 | 106 | |||
| 3 | 199 | 162 | 115 | |||
| 3 1/8 | 214 | 175 | 124 | |||
| 3 1/4 | 230 | 188 | 133 | |||
| 3 3/8 | 247 | 202 | 143 | |||
| 3 1/2 | 264 | 215 | 152 | |||
Rated capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter
Rated capacities based on design factor of 5
Horizontal sling angles less than 30 degrees shall not be used
Rated capacities shown apply only to 6×26 and 6×37 classification wire rope