2-Leg
6×26 & 6×37 EIPS IWRC
Product Description
| EIPS Capacities in Tons Horizontal Angle | Skookum Master link Made in USA | |||||
|---|---|---|---|---|---|---|
| Rope Diameter (inches) | 60 Degree | 45 Degree | 30 Degree | Diameter | Inside Width | Inside Length |
| 1/4 | 1.1 | 0.91 | 0.65 | 1/2″ | 2.5″ | 5″ |
| 5/16 | 1.7 | 1.4 | 1 | 1/2″ | 2.5″ | 5″ |
| 3/8 | 2.5 | 2 | 1.4 | 1/2″ | 2.5″ | 5″ |
| 7/16 | 3.4 | 2.7 | 1.9 | 5/8″ | 3″ | 6″ |
| 1/2 | 4.4 | 3.6 | 2.5 | 3/4″ | 2.75″ | 5.5″ |
| 9/16 | 5.5 | 4.5 | 3.2 | 1″ | 3.5″ | 7″ |
| 5/8 | 6.8 | 5.5 | 3.9 | 1″ | 3.5″ | 7″ |
| 3/4 | 9.7 | 7.9 | 5.6 | 1″ | 3.5″ | 7″ |
| 7/8 | 13 | 11 | 7.6 | 1-1/4″ | 4.38″ | 8.75″ |
| 1 | 17 | 14 | 9.8 | 1-1/2″ | 5.25″ | 10.5″ |
| 1 1/8 | 21 | 17 | 12 | 1-1/2″ | 5.25″ | 10.5″ |
| 1 1/4 | 26 | 21 | 15 | 1-3/4″ | 6″ | 12″ |
| 1 3/8 | 31 | 25 | 18 | 1-3/4″ | 6″ | 12″ |
| 1 1/2 | 37 | 30 | 21 | 2″ | 7″ | 14″ |
| 1 5/8 | 42 | 35 | 24 | 2″ | 7″ | 14″ |
| 1 3/4 | 49 | 40 | 28 | 2-1/4″ | 8″ | 16″ |
| 1 7/8 | 56 | 46 | 32 | 2-1/4″ | 8″ | 16″ |
| 2 | 63 | 52 | 37 | 2-1/2″ | 8″ | 16″ |
| 2 1/8 | 69 | 56 | 40 | |||
| 2 1/4 | 77 | 63 | 44 | |||
| 2 3/8 | 85 | 70 | 49 | |||
| 2 1/2 | 94 | 77 | 54 | |||
| 2 5/8 | 103 | 84 | 60 | |||
| 2 3/4 | 113 | 92 | 65 | |||
| 2 7/8 | 122 | 100 | 71 | |||
| 3 | 133 | 108 | 77 | |||
| 3 1/8 | 143 | 117 | 82 | |||
| 3 1/4 | 153 | 125 | 89 | |||
| 3 3/8 | 165 | 135 | 95 | |||
| 3 1/2 | 176 | 144 | 102 | |||
| 4 | 224 | 183 | 130 | |||
Rated capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter
Rated capacities based on design factor of 5
Horizontal sling angles less than 30 degrees shall not be used
Rated Capacities shown apply only to 6×26 and 6×37 classification wire rope